The XtraFall Taper System provides the designer and contractor with a precise, technically excellent solution to providing thermal insulation and bespoke drainage on flat roofing that avoids water retention and consequent damage in traditional flat roofs. Unilin Insulation offer a comprehensive range of high performance PIR Flat Roof insulation boards that includes the XF range […]

KORE EPS is the ideal insulation solution for a variety of flat roof applications, including warm roofs, inverted flat roofs, metal deck roofs and tapered roofs.Available in a range of thicknesses with a very high compressive strength with low water absorption properties. Cost-optimal and high-performance Expanded Polystyrene ensures compliance with Part L 2021 while offering […]

XPS Insulation is a high performance rigid extruded polystyrene insulation board providing a durable thermal solution to technically demanding applications where high compressive loading is a requirement. XPS comes in three levels of compressive strength 300,500 and 700 kPA and is ideally suited for use in commercial, industrial, residental areas where heavier trafficking and loading […]

Designed for warm flat roofs, ROCKWOOL HardRock Multi-Fix (DD) is a high density, non-combustible thermal insulation board which has also been tested for acoustic applications and fire resistance. ROCKWOOL HardRock Multi-Fix (DD) has been proven to improve the ability of lightweight flat roof systems to control both noise ingress and egress through the building envelope. […]

Mardome rooflights have been designed to increase the energy saving benefits of natural light by maximising the glazing area to deliver significantly more daylight whilst achieving optimum thermal performance, for light, bright, glazing area to deliver significantly more daylight whilst achieving optimum thermal performance, for light, bright, energy efficient buildings.

Your partner in mechanical fastening solutions for the building envelope. Eurofast® are a manufacturer of fastening solutions with full-service technical consultancy for mechanically fastening of the building envelope. At Eurofast we unburden our customers as much as possible in their process of finding the best suitable mechanical fastening solution. We ensure that every building envelope […]

Eurofast is manufacturer of the leading brand Eurofast® and a full-service technical consultancy firm, for mechanically fastening the building envelope. Eurofast strive to unburden customers as much as possible in the process of finding the best suitable mechanical fastening solution, for their specific situation. This ensures that every building envelope is fastened to the highest […]

At Tecron we offer a wide range of hand tools for hard metal installation. these include snips, seam closers, eaves closers and a variety of detailing tools to deal with every minute detail encountered on a traditional standing seam hard metal roof.

At Tecron we offer a wide range of tools for flat roof installation. These include hot air welders, nozzles, probes and more.

Zettex offers PU Filling Foams providing a solution for everyday practical applications encounterd on site.

Zettex produces a range of top quality polymer Sealnts & Adheives providing a solution to most commonly encountered situations on site on a daily basis.

Zettex offers PU Foam adhesives providing an adhesive solution for the majority of practical applications encountered on site on a daily basis.

At Tecron we aim to provide a comprehensive range of tools and accessories to compllment our product offerings. Please scroll through the products and if what youre looking for isnt listed here for some reason we will aim to locate what you require.

Thermaweld is a market leading bituminous waterproofing system and is intended for use as a torch-applied top sheet in a bitumen built-up roof system. Membranes should be installed in accordance with the manufacturer’s guidelines. The standard membrane colour is charcoal. Alternative membrane colour options are subject to minimum order quantities.

Tecnatorch is our pioneering, torch-on bitumen system for flat roofing projects. It’s tried and tested. And it’s been trusted by generations of roofing professionals. Because Tecnatorch is a complete system that makes it easier to achieve roofing you can be proud of. Just like it’s always helped roofers build their own reputation for excellence across […]

Rootbar capsheet is intended for use as a torch-applied capsheet in a bitumen built-up roof system suitable for use beneath roof gardens or terraces. Membranes should be installed in accordance with the manufacturer’s installation guidelines.

ThermoSolo is intended for use as a torch-applied single layer top sheet for overlaying existing bituminous roofing where a partial bond is required. Membranes should be installed in accordance with the manufacturer’s guidelines.

Noxite is a smart, sustainable bitumen flat roof waterproofing membrane that removes harmful airborne pollutants and provides a cleaner, healthier environment around the building.

Total Torch Vapour Dispersion Layer is intended for use as a torch-applied underlay/base layer in a bitumen built-up roof system. Membranes should be installed in accordance with the manufacturer’s guidelines.

Total Torch Vapour Control Layer is intended for use as an air & vapour control layer in a warm roof system build-up. Membranes should be installed in accordance with the manufacturer’s guidelines.

TorchSafe TA Underlay Sand is a heat-activated/self-adhesive glass reinforced SBSmodified bitumen membrane with vapour control stripes.

TorchSafe TA Detailing Underlay is intended for use as a fully bonded underlay in a bitumen built-up roof system. Membranes should be installed inaccordance with the manufacturer’s guidelines.

Siplast Primer is designed to penetrate and seal substrates of masonry, concrete, cementitious screeds or renders, existing bituminous or asphalt waterproofing, structural steelwork and other metals, prior to the application of torch applied bituminous membranes. Products should be installed in accordance with the manufacturer’s guidelines.

Icopal Twin Pack Membrane (T.P.M) Adhesive is intended for use as a single sided bead adhesive to bond a range of waterproofing membranes, such as Universal POCB or TorchSafe MA, to various compatible substrates. The adhesive is supplied as a twin pack cartridge and requires the Icopal TP Applicator Kit to be installed.

Icopal Twin Pack Insulation (T.P.I)Adhesive is intended for use as a single sided bead adhesive to bond a range of warm roof thermal insulations boards to sand finished bituminous air & vapour control layers. The adhesive is supplied as a twin pack cartridge and requires the Icopal TP Applicator Kit to be installed.

The Icopal Twin Pack (TP) Applicator Gun is specifically designed for use with the TPI & TPM twin pack cartridge adhesives

Icopal Insulation Pour Adhesive is a single component moisture cured polyurethane adhesive suitable for the bonding of insulation boards used as a part of a flat roof waterproofing system.

BMI ICOPAL Parabit Solo Single Pour is a rinforced self healing waterproofing system developed for use in inverted, green and plaza deck roof systems.

BMI Icopal hot melt system is a reinforced self-healing waterproofing membrane specially developed for use in inverted, green, and plaza deck roofing systems. Designed for concrete substrates, the hot melt system represents the optimum solution for speed of application and cost-effectiveness. This hot melt system is applied using two coats of the hot melt compound.

FR/ALU is a high performance Polyisocyanurate flat roof insulation with vapour-tight aluminium foil facings suitable for use with single ply membranes. FR/ALU is part of the comprehensive range of high performance flat roof boards providing total solutions for flat roof projects. TR/ALU provides a tapered verison of the product for situations where a fall needs […]

Flat Roof MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. TR/MG provides a tapered verison of the product for situations where a fall needs to be created.

Tecron NC Fleece-backed Membrane Adhesive is a non-chlorinated, polyurethane spray adhesive, designed to be applied single sided to the roof deck only. It has been specifically designed for bonding all fleece-backed single ply membranes including TPO/FPO, EPDM and PVC, to various roof decks such as insulation boards, concrete, plywood, cementitious boards and existing asphalt/bituminous surfaces. […]

With Fatra single ply membranes a wide varity of roof finishes are possible from Standing Seam profiles to full Green Roof Systems. The Fatra membranes can be laid in any format either as a traditional exterior wtaerproofing mebrane or as part of an invetred roof system.

Tecron Self Adhesive VCL is a self-adhesive membrane manufactured with bituminous selected mastic modified with high performance SBS polymers, this will provide self-healing properties, easy application and great durability. As a top layer it has an aluminium foil of 60/1000 mm natural colour. At the bottom side it has a releasable film.

Tecron Fleece PP 200 is a non-woven geo-textile formed by polypropylene threads, interwoven by needling, without the need or application of chemical binders. It has excellent mechanical and hydraulic behaviour. Non-woven polypropylene geo-textiles are used primarily for separation, filtration, and drainage applications. They are typically installed between different layers of soil or other materials to […]

PVC-P Vertical Outlets are supplied in a range of sizes to suit the various pipe sizes most commonly used in drainage. These outlets are made from a soft flexible PVC which means they are extremely easy to install. The materials used are UV stabilised and are resistant to ozone and other atmospheric chemicals. The spigot […]

PVC-P Vertical Outlets are supplied in a range of sizes to suit the various pipe sizes most commonly used in drainage. These outlets are made from a soft flexible PVC which means they are extremely easy to install. The materials used are UV stabilised and are resistant to ozone and other atmospheric chemicals. The spigot […]

Fatra Accessories provide a valuable array of items that are crucial for the successful completion of roof areas. These accessories comppliment the Fatra membranes and all form part of the fully integrated and complete Fatra system of waterprrofing.

Protec is a highly versatile, fast curing, fully reinforced cold liquid applied membrane system ideal for a wide range of roofing and waterproofing applications. The Protec RapidCure technology utilises catalyst, accelerators and inhibitors allowing full control over cure times across a wide range of temperatures all year round. The seamless Protec membrane features the optimum […]

The Protec Evolve System is an ultra-low odour, sustainable, liquid applied membrane that provides long-lasting waterproofing for a wide range of refurbishment and new-build applications. Protec Evolve is carbon neutral, with cradle-to-grave carbon emissions fully offset using high-quality Verified Carbon Standard (VCS) carbon credits—supporting vital renewable energy projects, reducing climate change, and assisting you and […]

The XtraFlex system is engineered for enhanced flexibility, making it ideal for coating industrial gutters and non-corrugated metal roofs where it is able to form excellent adhesion to most metal substrates. Sharing the same chemical backbone as Protec, its fast-curing and imperviousness to standing water make Xtraflex ideal for providing lasting waterproof performance, even in […]

ProGrip is a hybrid MMA anti-slip coating that is designed to provide durable anti-slip resistant finishes in just a single coat. The liquid contains a pre-dispersed aggregate and uses Polyroof catalyst for rapid cure times with walk times of 30-60 minutes. ProGrip has outstanding adhesion properties, being able to bond to Polyroof waterproof membranes and […]

ARBOFLEX® PU is a single component liquid made from pure polyurethane. The material properties of ARBOFLEX® PU enable it to be airtight and waterproof on a range of substrates. ARBOFLEX® PU is brush or roller applied and can be applied on a wide range of surfaces and materials. ARBOFLEX® PU offers seamless finishing, green roof […]

HERTALAN® EASY COVER is a sustainable high-quality pure EPDM flat roof waterproofing membrane for the professional user.The vulcanised EPDM membranes combine the excellent material properties of EPDM with tailor-made solutions. Hertalan is BBA certified and has a service life of 50+ years. There are big advantages to working with EPDM membranes. The number of seams […]

Tecron EPDM Membrane Contact Adhesive is a high-performance industrial web spray contact adhesive formulated specifically for bonding plain EPDM flat roofing membranes to a variety of roof decks, including concrete, most insulation boards, plywood and cementitious boards. This material is particularly good for large area work however it is suitable for detailed areas where smoothness […]

Alphathor is a new generation EPDM roof membrane. It combines dimensional stability with elasticity and distinguishes itself in terms of quality, ease of use and speed. The unique self-adhesive membranes are applied directly to the substrate without an adhesive primer: convenient and economical. The membranes and fittings are thermally welded into one clean, homogeneous EPDM […]

AlphaFacade EPDM damp proofing tape is designed to insulate joints between window or door frames and walls. In the fully adhesive version, AlphaFacade forms a durable moisture and waterproofing insulation under facade panel joints on ventilated or traditional building facades.

AlphaFlex is a high-quality EPDM flashing tape reinforced with aluminium mesh for excellent formability and profiling to all the various shapes required on roof applications as an alternative to lead. It is used for sealing external joints, in places difficult to waterproof. It is a totally viable alternative to the use of lead in roof […]

Aluminium offers an exceptional alternative to traditional natural metals such as Zinc, Copper, and Corten Steel for cladding and roofing in a wide range of construction applications. Traditional Textures precoated aluminium not only captures the vivid color pigments found in natural metals but also replicates the natural weathering process they undergo, resulting in a consistently […]

GreenCoat PLX has been developed together with tinsmiths in order to obtain optimum product properties combined with Nordic quality steel and an excellent coating. The result is a unique, premium product for roofing tinsmiths.

NedZink is a market leader in the Netherlands, NedZink promotes creative applications of zinc. The options include bright-rolled zinc (NATUREL), grey pre-weathered zinc (NOVA), mineral grey pre-weathered zinc (NEO) and black pre-weathered zinc (NOIR). Constantly applying the existing product in new ways, and in a new form, means that zinc continues to be a fascinating […]

Fatra FF812 is a high performance PVC-P roof waterproofing membrane, designed for use as a slip-resistant walkway. The membrane has a textured surface and is ideal for the demarcation of maintenance routes and should be installed in a contrasting colour to the main field area.

FATRANYL PVC is a coated metal, which is double-faced zinc-coated steel sheet. It is treated with a layer of PVC-P film being stabilized to weathering influences and UV radiation. The back metal plate is treated with a coating varnish.

FF814 PVC Standing Seam Profiles are a triangular profile designed to be applied to membrane covered roofs to reproduce the appearance of a traditional metal roof. FF814 Profiles can be applied to both new build and refurbishment projects.

Fatra preformed details are made from FF804 unreinforced membrane and can provide a cost effective way of completing pipe details on Fatra roofs. They should be heat welded to the Fatra membrane and the upstand finished with a stainless steel clip and Fatra FF857 silicone.

A preformed PVC corner manufactured from Fatra FF804 unreinforced membrane. Internal or external corners must be used on every corner.

A pre-cut PVC disc manufactured from Fatra FF810 reinforced membrane. Used as part of a fixing system for FF810 reinforced membranes.

FF855 Mechanically Fixed Membrane Adhesive is a low viscosity, polyurethane adhesive that has been specially developed for bonding Fatra FF810 mechanically fixed membrane to Fatra FF852 PVC fixing discs in Fatra’s mechanically fixed single ply membrane roofing system. FF855 comes in a 5 litre can

Fatra FF854 PVC Liquid Sealant to be used in association with Fatra membranes. FF854 PVC Liquid Sealant only needs to be used on site-cut edges of FF810 Membrane

FF859 is a one component, moisture curing polyurethane adhesive which has been formulated for bonding Fatra FF807 fleece-backed PVC membranes to insulation boards. FF859 will also adhere FF807 directly to plywood decks in a cold roof application. The adhesive is roller applied and cures by reacting with atmospheric moisture. The cured adhesive film has very […]

FF816 Self-adhesive VCL is a self-adhesive vapour barrier and bituminous waterproofing membrane that forms a total barrier against vapour and gases. It consists of a self-adhesive, low thickness SBS polymers bituminous compound self-protected on the top side by reinforced aluminium film and has a releasable film on the bottom side.

Fatra FF818 Polythene Vapour Control Layers are used to omit the risk of interstitial condensation within a structure as well as improving the general air-tightness of the building. Fatra Polyethylene Vapour Control Layers restricts the passage of warm, moist air from within the building from permeating into the structure or the roof.

A low viscosity, high penetration, cold applied bituminous solution designed to prime and seal porous roof surfaces prior to the application of bituminous materials. FF817 Bitumen Primer seals porous substrates and promotes the adhesion of bituminous waterproofing systems and sheet coverings. It may be applied to a range of surfaces:

Tecron Self Adhesive Membrane Primer is a solvent based primer based on synthetic rubber and resins, and is specifically designed for use with all self-adhesive membranes and vapour barriers. QDEK® 2400 Membrane Primer can be applied to metallic substrates, bituminous materials, wood based materials, and insulation boards. QDEK® 2400 once applied to the roof deck, […]

Tecron NC PVC Membrane Contact Adhesive is a high performance, non-chlorinated polyurethane contact spray adhesive. Tecron NC PVC Membrane Contact Adhesive has been specifically developed for bonding plain PVC flat roofing membranes to a variety of roof decks including concrete, insulation boards, plywood and cementitious boards. Tecron NC PVC Membrane Contact Adhesive is excellent for […]

Fatra FF810 is a high performance, polyester-mesh reinforced PVC-P roof waterproofing membrane, designed for use as a mechanically fixed waterproofing covering on flat or pitched roofs. The membrane comprises upper, middle and lower layers manufactured by a calender-mould process. The layers are thermoplastically fused together, sandwiching the polyester mesh between them.

Fatra FF807 is a high-performance, PVC-P roof waterproofing membrane with a non-woven polyester fleece-backing designed for use as a Fully Adhered waterproofing covering on flat or pitched roofs. One long edge of the FF807 includes a fleece-free selvedge to enable hot air welding to the adjacent sheet

Fatrafol FF804 is a high performance PVC-P roof waterproofing membrane, designed as a supplement to Fatra membranes for detail working and finishing e.g. penetrations, vertical abutments etc. It is not suitable for main field area application. Featuring excellent ductility and shaping capabilities, FF804 enables quick and efficient waterproofing of complicated surfaces. Fatrafol FF804 is accredited […]

Fatrafol FF841 is a high performance PVC-P roof waterproofing membrane, designed as a supplement to Fatra membranes for detail working and finishing e.g. joints on metal trims & flashings, penetrations, vertical abutments etc. Fatra FF841 is supplied in convenient roll sizes for ease of use and speed of application. FF841 enables quick and efficient waterproofing […]

Fatra FF842 is derived from FF810 and is a high performance, polyester-mesh reinforced PVC-P waterproofing membrane, FF842 is designed for use as a detail roll for coverstripping metal to membrane details and is particularly useful in lonf runs of cover-stripping. The membrane comprises upper, middle and lower layers manufactured by a calender-mould process. The layers […]

Fatra FF914 Stafol Protection Membrane is a high performance, 0.5mm thick unreinforced PVC membrane designed for use as a protective / sacrificial layer in Fatra sedum or ballasted roof applications. FF914 Stafol should be loose laid directly on top of the finished Fatra waterproofing membrane e.g. Fatra FF810 or Fatra FF807. FF914 Stafol is suitable […]